Above-Ground or Therapy Pool Lift Model AG-72

●  Lifts Over 60" Wall.

●  Assisted Operation.

●  Manual 360° Seat Turn.

●  Powered by Water Pressure.

●  Lifts up to 300 LB. at 55-65 PSI.

●  No dangerous and expensive batteries required. Completely green to operate.

●  Vertical Seat Travel - 51".

●  Installs on Deck and Top Pool Flange.

●  Read the information below for more details.

The Pool Lift Model AG72 was specifically designed to lift people into and out of above-ground high wall therapy pools walls. After raising the seat, the assistant turns the seat while helping to lift the patient's legs, then turns the valve handle to lower the seat inside the pool. The stainless-steel plate at the base of the cylinder is bolted to the floor, and a stainless-steel bracket around the top of the cylinder is bolted through the top pool flange. The standard seat has two arms and a seat belt is included with each lift.

Just let us know your needs before ordering.  E-Mail:  askalanaquestion.com to obtain a Dimensional Work Sheet, to help determine the requirements for your particular installation.  This helps assure that you get the right unit, for your needs, location and type of pool or spa.  The Dimensional Work Sheets can be sent, to you, by E-Mail, Fax or Mail.  Make sure to include all of the contact information.  You can return them, by E-Mail, Fax or Mail.