Above-Ground Pool or Spa Lift Model AG-60

●  Can accommodate variable wall heights.

●  Usually assisted operation.

●  Manual 360∞ Seat Turns.

●  Mounts on sturdy tripod mounting plate, as shown.

●  Powered by Water Pressure.

●  Lifts up to 300 LB. at 55-65 PSI while lifting . (approximately 60 PSI static faucet pressure.

●  No dangerous and expensive batteries required. Completely green to operate.

●  Vertical Seat Travel - 42".

●  Also available as AG-60 WP (mounts on wood post).

●  Read the information below for more details.
 

The Pool Lift Model AG-60 is a great access addition to above-ground spas and hot tubs.  On this model, the cylinder is welded to a 16" x 16" stainless-steel plate with tripod supports.  This plate is bolted to the floor In an alternate mounting, the lift is attached to the top edge of the spa.  The standard seat can be right- or left-mounted or forward-facing and has two rigid arms.  Several manual turn handles enable some customers to operate the lift independently by manually rotating themselves while on the seat. Other applications for this unit include freestanding nursing home tubs. The control valve is mounted on the cylinder and can be adjusted in height.

Just let us know your needs before ordering.  E-Mail:  askalanaquestion.com to obtain a Dimensional Work Sheet, to help determine the requirements for your particular installation.  This helps assure that you get the right unit, for your needs, location and type of pool or spa.  The Dimensional Work Sheets can be sent, to you, by E-Mail, Fax or Mail.  Make sure to include all of the contact information.  You can return them, by E-Mail, Fax or Mail.