Above-Ground Pool Lift Model AG-40 WP

●  Above Ground 48" Cylinder Wood Post.

●  Installs on Wood Post in Ground.

●  Manual 360° Seat Turn.

●  Powered by Water Pressure.

●  Lifts up to 300 LB. at 55-65 PSI, while lifting, (approximately 60 PSI static faucet pressure.

●  No dangerous and expensive batteries required. Completely green to operate.

●  Vertical Seat Travel - 31".

●  Also available in AG-60 and AG-72 models.

●  Read the information below for more details**

The Pool Lift Model AG-48WP is an enabling addition to freestanding above-ground pools and spas.  This lift mounts on a customer-supplied 6" x 6" wood post set 30" into the ground, secured with concrete, and cut off even with the top of the pool wall. The standard seat can be mounted facing right, left, or straight out, and has two stationary armrests. Several styles of manual-turn handles allow some people to use this lift unassisted by manually rotating themselves while on the seat. The wood post (WP) design is available in the AG-60 and AG-72 models as well.

Just let us know your needs before ordering.  E-Mail:  askalanaquestion.com to obtain a Dimensional Work Sheet, to help determine the requirements for your particular installation.  This helps assure that you get the right unit, for your needs, location and type of pool or spa.  The Dimensional Work Sheets can be sent, to you, by E-Mail, Fax or Mail.  Make sure to include all of the contact information.  You can return them, by E-Mail, Fax or Mail.