Above-Ground Pool or Spa Lift Model IGAT-180

●  Can accommodate variable wall heights.

●  Usually assisted operation.

●  Manual 360° seat turn.

●  Mounts on sturdy tripod mounting plate, as shown.

●  Powered by Water Pressure.

●  Lifts up to 300 LBS. at 55-65 PSI.

●  Standard Vertical Seat Travel - 31".

●  Read the information below for more details.

●  Various mountings dependent on application *

The Pool Lift Model AG-48 is an enabling addition to above-ground spas and hot tubs. On the model shown, the cylinder is welded to a 16" x 16" stainless-steel plate with tripod supports. This plate is bolted to the floor and the cylinder may be attached to the top edge of the spa in some applications. Other mountings available. The standard seat faces away from the spa, and has two rigid arms.  Optional side seats and  several styles of manual turn handles allow some people to use this lift unassisted by manually rotating themselves while on the seat. Other applications for this unit include freestanding nursing home tubs, therapy pools, and swim-spas.

Just let us know your needs before ordering.  E-Mail:  askalanaquestion.com to obtain a Dimensional Work Sheet, to help determine the requirements for your particular installation.  This helps assure that you get the right unit, for your needs, location and type of pool or spa.  The Dimensional Work Sheets can be sent, to you, by E-Mail, Fax or Mail.  Make sure to include all of the contact information.  You can return them, by E-Mail, Fax or Mail.